The switches come in both 3U and 6U VPX form factors. Most 3U modules use a 1-inch pitch, though some smaller modules use 0.8 or 0.85 inch, and the 6U module uses a 1-inch pitch. All modules are conduction or passive cooled with no moving parts and include two level maintenance (2LM) covers.

Every module in this line is a fully managed switch with WEB, CLI, and Telnet access. Most support full Layer 2 and Layer 3, including VRRP, OSPF v3, PIM, RIP, and ECMP, while the smallest 20 port module supports L3 static routing only.

The modules are designed to meet MIL-STD-461E for EMC and MIL-STD-810F/G for environmental conditions when installed in an appropriate chassis. They are VITA 65 compliant and SOSA aligned, with IPMI management per VITA 46.11 (Tier I, II, and III depending on the model). Because these ratings apply only when the module sits in a suitable chassis, chassis selection is part of your qualification path.

Backplane connectivity uses standard VPX connectors with high speed KR4 and KR lanes for the data and control planes. Front panel interfaces vary by model and can include MPO for fiber, LC, HARTING IX (P/N 09451812560), USB Type-C for CLI, and SMA for timing signals on the timing focused module. Since connectors differ per model and per configuration, confirm the ports section of the specific datasheet before finalizing your front panel and cabling.

Input is typically 12VDC from the backplane plus a 3.3VDC secondary supply per SOSA guidelines, with one of the smaller modules also accepting 5VDC. Power consumption ranges from roughly 12W on the smallest module to about 160W on the 6U module, so confirm the figure for your specific part. Most modules operate from -40C to +85C, with a couple of modules rated down to -45C and one topping out at +71C, so verify the exact range in the relevant datasheet.

Each model has a complete datasheet covering ports, connectors, power, performance, MIL-STD compliance, mechanical drawings, and ordering information with matching cable harnesses. For anything beyond the datasheet - ICDs, pinouts, qualification reports, lead time, or help selecting a part number - reach the team at [email protected]

Yes. Enercon Technologies offers modified off-the-shelf and fully customized VPX networking solutions. Customers can configure features such as port layouts, profiles, power inputs, security functions, and system architecture requirements to match mission-specific defense and aerospace applications.